Click image to view full size image
single row housing wire to board connector 1.00mm pitch 04 to 10 Pin with lock for Laptop A1001HB
5. Introduction
Wire to Board connector 1.00mm pitch housing/wafer/terminal A1001 series
| Specifications
| Pitch Size | 1.0mm | |||||
| Current rating | 1A AC, DC | ||||||
| Voltage rating | 50V AC, DC | ||||||
| Withstanding voltage | 500V AC/minute | ||||||
| Contact resistance | 20 mΩ Max | ||||||
| Insrlation resistance | 100 mΩ Min | ||||||
| Temperature range: | -25 ~ +85 | ||||||
| Rated Current (Max.) And Applicable Wire | AWG#28 | 1A | AC/DC | ||||
| Responsive Time | AWG#30 | 1A | AC/DC | ||||
| Panel Life | AWG#32 | 0.5A | AC/DC | ||||
| Mechanical Performance
| |||||||
| Test Description | Procedure | Requirement | |||||
| Actuator Insertion & Withdrawal Force | Insert and withdraw connectors at the speed rate of 25±3mm / minute. | Refer to paragraph 7 | |||||
| Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(based upon JIS C5402 6.8) | AWG#28 | 1.0kgf (Min) | ||||
| AWG#30 | 0.8kgf (Min) | ||||||
| AWG#32 | 0.5kgf (Min) | ||||||
| Terminal Insertion Force. | Insert the crimped terminal into the housing. | 0.50kgf (Max.) | |||||
| Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. | 0.70kgf (Min.) | |||||
| Pin Retention Force | Apply axial push force at the speed rate of 25 single row housing wire to board connector 1.00mm pitch 04 to 10 Pin with lock for Laptop A1001HB |
 Sell
New Login
Company QR code Anytime Anywhere Mobile |
|||||