Click image to view full size image
Pitch 2.50mm Wire to board PA66 Wafer connector2.0mm housing / terminal
Description:
1,A2506series Housing have A2506H-NP .Wafer: A2506WV/WR-NP,DIP type,circlnal PIN,Tin-Plated.
2, Housing used materials: PA66, Halogen Free , Fire-protection rating is UL 94-V0. Minimum packing quantity is 1000pcs/bag.
4.Terminals are stamped by Phosphor Bronze, E-Stamping before Tin-plated ,Tin-plated we calling A2506-TPe, Minimum packing quantity is 20,000pcs/Reel. The daily production capacity is 300 to 400 KPCS.
5.Terminals' wire range :AWG #22--#28,insulation OD is1.90mm(Max).
Specifications:
| Test Description | Procedure | Requirement |
| Contact Resistance | Mate connectors, measure by dry circuit, 20mV max., 10mA.(based upon JIS C5402 5.4) | 10mΩ (Max.) |
| Insulation Resistance | Mate connectors, apply 500V DC between adjacent terminal or ground. (based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B) | 1000MΩ (Min.) |
| Dielectric Withstanding Voltage | Mate connectors, apply 1000V AC (rms) for 1 minute between adjacent terminal or ground. (based upon JIS C5402 5.1/MIL-STD-202 Method 301) | No Breakdown. |
| Contact Resistance on Crimped Portion | Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA.. | 5mΩ (Max.) |
| Voltage rated | 250V AC ,DC |
| Current rated | 3A AC,DC |
| Withstand voltage | 1000VAC/minute |
| Insulation resistance | 1000MΩ Min |
| Contact resistance | 20mΩ Max |
| Operating temperature | -25°C~85°C |
