Click image to view full size image
Wire to board connectors pitch 2.54mm Brass Tin-plated or Gold-flash wire connector terminals
Description:
1. Terminals are stamped by Brass , E-Stamping before Tin-plated or Gold-flash ,Tin-plated we calling A2545-TPe, Gold-plated we calling A2545-GPe , Minimum packing quantity is 20,000pcs/Reel. The daily production capacity is 300 to 400 KPCS.
2. Terminals' wire range :AWG #22--#28,insulation OD is1.63mm(Max).
Specifications:
| Test Description | Procedure | Requirement |
| Contact Resistance | Mate connectors, measure by dry circuit, 20mV max., 10mA.(based upon JIS C5402 5.4) | 10mΩ (Max.) |
| Insulation Resistance | Mate connectors, apply 500V DC between adjacent terminal or ground. (based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B) | 1000MΩ (Min.) |
| Dielectric Withstanding Voltage | Mate connectors, apply 1000V AC (rms) for 1 minute between adjacent terminal or ground. (based upon JIS C5402 5.1/MIL-STD-202 Method 301) | No Breakdown. |
| Contact Resistance on Crimped Portion | Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA.. | 5mΩ (Max.) |
Elecrical:
| Voltage rated | 250V AC ,DC |
| Current rated | 3A AC,DC |
| Withstand voltage | 1500VAC/minute |
| Insulation resistance | 1000MΩ Min |
| Contact resistance | 20mΩ Max |
| Operating temperature | -25°C~85°C |
Quality:
Except the plating ,From Design tooling, stamping ,Injection molding, assemble, Testing ,packing .All the
step are doing by ourself. So we can control the quality.
1. Manufactured under strict controls.
2. ISO 9001:2008 ISO14001:2004
3. UL Certification
4. Reach Cetitifaction
5. RoHS compliance
6. OEM for PULSE
Design &Technical strength:<
Wire Connector Terminals 2.54mm Pitch Brass Tin-Plated / Gold-Flash
