Click image to view full size image
Pitch 2.00mm wire to board connector Automotive electrical housing /terminal
Description:
1. A2009series is A2009H-2*NP (dual row housing suitable A2001-T series terminal )
2, Housing used materials: PA66, Halogen Free , Fire-protection rating is UL 94-V0. Minimum packing quantity is 1000pcs/bag.
3. Dual row housing we have 2*10P ,2*12P ,The daily production capacity is 30 to 50 KPCS.
4. Terminals are stamped by Phosphor Bronze, E-Stamping before Tin-plated or Gold-flash ,Tin-plated we calling A2001-TPe, Gold-plated we calling A2001-GPe , Minimum packing quantity is 20,000pcs/Reel. The daily production capacity is 300 to 400 KPCS.
5. Terminals' wire range :AWG #26--#30,insulation OD is1.30mm(Max).
| Test Description | Procedure | Requirement |
| Contact Resistance | Mate connectors, measure by dry circuit, 20mV max., 10mA.(based upon JIS C5402 5.4) | 20mΩ (Max.) |
| Insulation Resistance | Mate connectors, apply 500V DC between adjacent terminal or ground. (based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B) | 1000MΩ (Min.) |
| Dielectric Withstanding Voltage | Mate connectors, apply 800V AC (rms) for 1 minute between adjacent terminal or ground. (based upon JIS C5402 5.1/MIL-STD-202 Method 301)) | No Breakdown. |
| Contact Resistance on Crimped Portion | Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA. | 5mΩ (Max.) |
| Current rated | 3A AC/DC maximum | |
| Voltage rated | 250V AC/DC | |
| Withstand voltage | 800V AC/minute | |
| Insulation resistance | 1000MΩ min | |
| Contact resis Connector Wire To Board 2.00mm Pitch 2PIN - 12PIN Tin-Plated / Gold-Flash |
 Sell
New Login
Company QR code Anytime Anywhere Mobile |