Click image to view full size image
Wire to board pitch 2.50mm Brass or Phosphor Bronze wire connector terminal
Description:
1. Terminals are stamped by Brass or Phosphor Bronze, E-Stamping before Tin-plated or Gold-flash ,Tin-plated we calling A2501-TPe, Gold-plated we calling A2501-GPe , Minimum packing quantity is 20,000pcs/Reel. The daily production capacity is 300 to 400 KPCS.
2. Terminals' wire range :AWG #22--#28,insulation OD is1.90mm(Max).
3. A2501 series terminal is E-stamping before Tin-plated
Specifications:
| Test Description | Procedure | Requirement |
| Contact Resistance | Mate connectors, measure by dry circuit, 20mV max., 10mA.(based upon JIS C5402 5.4) | 10mΩ (Max.) |
| Insulation Resistance | Mate connectors, apply 500V DC between adjacent terminal or ground. (based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B) | 1000MΩ (Min.) |
| Dielectric Withstanding Voltage | Mate connectors, apply 1000V AC (rms) for 1 minute between adjacent terminal or ground. (based upon JIS C5402 5.1/MIL-STD-202 Method 301) | No Breakdown. |
| Contact Resistance on Crimped Portion | Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA.. | 5mΩ (Max.) |
Electrical:
| Voltage rated | 250V AC ,DC |
| Current rated | 3A AC,DC |
| Withstand voltage | 1000VAC/minute |
| Insulation resistance | 1000MΩ Min |
| Contact resistance | 10mΩ Max |
| Operating temperature | -25°C~85°C |
Drawing:
Quality:
The world's
Wire Connector Terminals Pitch 2.50mm Brass A2501 Series Housing AWG#22 - 28
